BWDMK - GEL COAT PASTE, 663
- MSDS: BWDMK
- Manufacturer: FIBRE GLASS EVERCOAT CO INC
- Product Name: GEL COAT PASTE, 663
- National Stock Number: 8010-00N056039
Product Identification
Product ID:GEL COAT PASTE, 663
MSDS Date:08/08/1988
FSC:8010
NIIN:00N056039
MSDS Number: BWDMK
Responsible Party
CINCINNATI, OH 45242
US
Emergency Phone: 800-543-4530
Info Phone: 513-489-7600
Cage: 18731
Contractor
Telephone: 513-489-7600
Cage: 18731
Ingredients
295F,146C.
CAS: 100-42-5
RTECS: WL3675000
Fraction By Weight: <40%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM;100 STEL, S
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
UNSATURATED POLYESTER RESIN
Fraction By Weight: >60%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:PROLONGED OR FREQUENT
CONTACT MAY CAUSE DEFATTING, DRYNESS W/IRRITATION & POSSIBLE
DERMATITIS. STYRENE MAY BE ABSORBED THROUGH SKIN IN TOXIC AMOUNTS.
EYES:MAY CAUSE TEARING & IRRITATION. IN HAL:VAPORS MAY CAUSE NOSE,
THROAT & RESPIRATORY TRACT IRRITATION. HIGH CONCENTRATION MAY CAUSE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE:IARC MONOGRAPHS, SUPPLEMENT, VOL
7, PG 345, 1987:GROUP 2B. ANIMAL:NERVOUS SYSTEM.
Effects of Overexposure:HLTH HAZ:HEADACHE & NAUSEA. REPEATED HIGH
CONCENTRATION EXPOSURE MAY CAUSE LIVER & KIDNEY DAMAGE. INGEST:MAY
CAUSE GI DISTURBANCES, PAIN & DISCOMFORT. CHRONIC:INHAL:REPEATED
EXPOSURE TO HIGH CONCENTRA TIONS MAY CAUSE LIVER & KIDNEY DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN:WASH W/SOAP & WATER. EYES:FLUSH W/WATER FOR AT LEAST 15
MINUTES. GET MEDICAL ATTENTION. INHAL:REMOVE VICTIM FROM EXPOSURE.
IF VICTIM IS UNCONSCIOUS, GIVE ARTIFICIAL RESPIRATION OR OXYGEN IF
NEEDE D. GET MEDICAL ATTENTION. INGEST:DO NOTINDUCE VOMITING
(ASPIRATION HAZARD). GET IMMEDIATE MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:CC
Flash Point:89.0F,31.7C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL OR CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES SUCH AS IN A
FIRE, POLYMERIZATION MAY TAKE PLACE. IF CONTAINED, VIOLENT RUPTURE
MAY RESULT.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION. ABSORB SPILL
W/ABSORBENT MATERIAL SUCH AS VERMICULITE OR SAND.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID STORAGE >100F. STORE ONLY IN
ORIGINAL CONTAINERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:A NIOSH/MSHA APPROVED CANISTER TYPE RESPIRATOR
MUST BE WORN TO PREVENT THE INHALATION OF VAPORS OR SPRAY MISTS
WHEN THE TLV OR PEL IS EXCEEDED. WEAR A NIOSH/MSHA APPROVED DUST
MASK WHEN SANDING CURED PRODUCT.
Ventilation:GENERAL VENTILATION IS REQUIRED DURING NORMAL USE.
Protective Gloves:PLASTIC OR CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL GOGGLES & FACESHIELD.
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:SEE ING 1
Vapor Pres:4.3 @ 20C
Vapor Density:HVR/AIR
Spec Gravity:1.1
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:NIL
Appearance and Odor:FLUID; SHARP AROMATIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT & DIRECT SUNLIGHT.
Hazardous Decomposition Products:HEATING TO DECOMPOSITION MAY CAUSE THE
EMISSION OF IRRITATING ACRID FUMES.
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES, AS IN A FIRE.
Disposal
Waste Disposal Methods:SMALL QUANTITIES CAN BE REACTED W/APPROPRIATE
HARDENER TO SOLIDIFY. DISPOSE OF I/A/W ALL FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.